HTCure Technology
Cobolt introduces HTCure™ Technology
Users with experience in design or manufacture of lasers are familiar with the challenges involved in meeting the extremely tight tolerances for all the components that build up the laser cavity. A low-noise precision laser is a very delicate and sensitive device, and its performance may severely degrade as a result of a mechanical displacement of a cavity component on the order of sub-µm or sub-µrad, or as a result of very small levels of contamination on optical surfaces. This sets extremely high demands on the method for fixation of cavity components in the manufacturing process, as well as on the choice of materials.
Solid-state lasers are known to offer much extended lifetime as compared to gas lasers, thanks to the lack of problems associated with the nature of a gaseous lasing medium. However, this advantage can not be realised in practice if the laser assembly in itself is neither extremely stable over time nor insensitive to thermal and mechanical shocks or vibrations.
The introduction of High Temperature Curing or HTCure™ Technology, a new proprietary method for fixation of cavity components developed by Cobolt, provides a solution to this problem and has established a new level of reliability for precision solid-state lasers.
The HTCure™ Technology is based on building the lasers into a hermetically sealed sub-package in a planar configuration. The material and design of each component in the architecture has been carefully chosen for extremely high overall thermo-mechanical stability. As a result, the design is so thermo-mechanically stable that the whole laser can be baked at >100° C for several hours and at multiple phases as part of the manufacturing process without the laser going out of alignment or any damage being caused.
This extra-ordinary capability of the design has enabled the use of a new advanced type of adhesive for the fixation of cavity components that cures at high temperatures, instead of the traditional UV curing fixation methods. Thermal curing yields a very stiff and reliable fixation joint, free from outgassing and the long-term drifts sometimes associated with aftercuring using UV light hardening.
First introduced on the 04-01 series of Cobolt lasers, the HTCure™ Technology manufacturing technique has provided outstanding performance, in all aspects, and especially in terms of the robustness of the laser. The lasers’ sensitivity to varying environmental and transport/storage conditions has been dramatically reduced. As an additional advantage, the lasers can be delivered in an ultimately compact package suitable for OEM integration.
Lasers built using HTCure™ Technology have shown to withstand multiple 60G mechanical shocks in operation (limited by equipment capacity) without any sign of degraded performance. They can be exposed to extreme temperatures (>100° C), and are insensitive to pressure and humidity (in one example the laser was cooked in boiling water before operation).
The new design has also proven to result in outstanding DC power and beam pointing stability with varying ambient temperatures (<3% pk-pk and <6µrad/° C respectively over 20-50° C) and has virtually eliminated laser failure in the field. (Warranty period 18 months, unlimited number of hours of operation!)
The results show that HTCure™ Technology is an advanced manufacturing technique which provides reliability and performance for today’s demanding applications.
The Cobolt series of lasers are manufactured in a modern